1. Manufacturing science, Adaptive control system, Vibration analysis,

1. Machining

2. Theoretical modal analysis

3. Machine tool dynamics and vibration analysis

4. Monitoring and control of manufacturing processes

5. Mathematical modeling and stochastic state estimation

6. Advanced manufacturing process and machining of super alloys

7. Surface modifications of bio-implant and product development

8. Sustainable manufacturing and tribology analysis

9. Friction stir welding

1. MHRD Fellowship for the Ph.D. program (2013-2018)

2. Institute Fellowship (2019)

Teaching

1. Assistant Professor, Department of Mechanical Engineering, IIITDM Kancheepuram, India-600127 (January 2021 -till date)

2. Assistant Professor, Mechanical Engineering, ICT Mumbai-Bhubaneswar campus (IOCB), India-751013 (January 2020 to August 2020)

3. Faculty Associate, School of Mechanical Engineering, KIIT Bhubaneswar (Deemed University), India-751024 (August 2012 to December 2013)

4. Assistant Professor, Department of Mechanical Engineering, CVRCE Bhubaneswar (Autonomous), India-752054 (January 2012 to July 2012)

Research

1. Research leading to Ph.D. degree (2013 to 2019)

2. Research leading to M.Tech. degree (2009 to 2011)

Industry

1. Trainee: Rourkela Steel Plant, SAIL (2006)

1. Indian Science Congress (2013-2014)

2. Institute of Researchers

3. SAE India

1. Reviewer: Elsevier-MSSP, JMP, IJMTM and others

2. Reviewer: Sage-IMechE (Part B, C and E) and others

3. Reviewer: IAU Publications

4. Chief-Guest Editor: Special issue-American Journal of Mechanical Engineering (2017)

1. Applied & Engg mechanics

2. Materials for Engineers

3. Fluid mechanics

4. Machine dynamics

5. Manufacturing technology (Part-I and Part-II)

6. Metal cutting and tool design

7. Metrology, quality assurance and reliability

1. To be updated...

1. Kashfull Orra, Sounak K Choudhury (2021) Experimental investigation of machining process by micro-textured cutting insert together with magneto-rheological damper, Wear, 1-13 (accepted). [https://doi.org/10.1016/j.wear.2021.203731]

2. Kashfull Orra (2021) Mathematical modelling, analysis of novel corona disease, and Its effect on the human being, International Journal of Knowledge-Based Organizations, 11, 17-29. [DOI: 10.4018/IJKBO.2021040102]

3. Kashfull Orra, Sounak K. Choudhury (2020) Stability analysis in machining process by using adaptive closed-loop feedback control system in turning process, Journal of Vibration and Control, 1-13. [https://doi.org/10.1177%2F1077546320952613]

4. Kashfull Orra, Sounak K. Choudhury (2018) Mechanistic modelling for predicting cutting forces in machining considering effect of tool nose radius on chip formation and tool wear land, International Journal of Mechanical Sciences, 142-143, 255 – 268. [https://doi.org/10.1016/j.ijmecsci.2018.05.004]

5. Kashfull Orra, Sounak K. Choudhury (2018) Tribological aspects of various geometrically shaped micro-textures on cutting insert to improve tool life in hard turning process, Journal of Manufacturing Processes, 31, 502 – 513. [https://doi.org/10.1016/j.jmapro.2017.12.005]

6. Rahul Kishore, Sounak K. Choudhury, Kashfull Orra (2018) On-line control of machine tool vibration in turning operation using electro-magneto rheological damper, Journal of Manufacturing Processes, 31, 187 – 198. [https://doi.org/10.1016/j.jmapro.2017.11.015]

7. Kashfull Orra, Sounak K. Choudhury (2016) Development of flank wear model of cutting tool by using adaptive feedback linear control system on machining AISID2 steel and AISI4340 steel, Mechanical Systems and Signal Processing, 81, 475 - 492. [https://doi.org/10.1016/j.ymssp.2016.03.011]

8. Susant K. Sahu, Purna C. Mishra, Kashfull Orra, Ashok K. Sahoo (2015) Performance assessment in hard turning of AISI 1015 steel under spray impingement cooling and dry environment, IMechE Part B: Journal of Engineering Manufacture, 229, 251 - 265. [https://doi.org/10.1177%2F0954405414528165]

9. Ashok K. Sahoo, Kashfull Orra, Bharat C. Routra (2013) Application of response surface methodology on investigating flank wear in machining hardened steel using PVD TiN coated mixed ceramic insert, International Journal of Industrial Engineering Computations, 4, 469 – 478. [http://dx.doi.org/10.5267/j.ijiec.2013.07.001]

10. A.K. Sahoo, K. Orra, A.K. Rout, B.C. Routra (2012) Multi-response optimization in machining hardened steel using grey-based taguchi method, International Journal of Manufacturing Technology and Industrial Engineering, 1 (1), 7 – 12. [ISSN: 0976-6251]

12. 

1. Kashfull Orra, Sounak K Choudhury (2021) Experimental investigation of machining process by coupling geometrical shaped micro-textured cutting insert together with MR damper, 23rd International Conference on Wear of Materials, Poster presentation, Canada-2021 (accepted)

2. Rahul Kishore, Sounak K Choudhury, Kashfull Orra (2017) Magneto rheological damper assisted control of machine tool vibration, 3rd World Conference on Applied Science, Engineering and Technology, Singapore, vol. 1 (9), pp. 3, 29th -30th June, 2017. [ISBN: 978-81-932966-9-1]

3. Amarjit P. Kene, Kashfull Orra, Sounak K. Choudhury (2016) Experimental Investigation of tool wear behavior of multi-layered coated carbide Inserts using various sensors in hard turning process, 8th IFAC Conference on Manufacturing Modelling, Management and Control MIM, Troyes, France, vol. 49 (12), pp. 180 – 184, 28th - 30th June, 2016. [https://doi.org/10.1016/j.ifacol.2016.07.592]

4. A.K. Sahoo, K. Orra, D. Das, T. Mohanty, A.K. Rout, B.C. Routra (2012) The Investigation on the prediction of flank wear in hard turning with TiN coated mixed ceramic Insert based on the response surface methodology, Proceedings of International & All India Manufacturing Technology, Design and Research Conference (AIMTDR), Jadavpur University, Kolkata, Key Notes and Abstracts Volume, Page 55, Paper code AM-06, 14th - 16th December, 2012.

5. A.K. Sahoo, K. Orra, A.K. Rout and B.C. Routra (2011) Multi-response optimization in machining hardened steel using grey-based taguchi method, Proceedings of International Conference on Advances in Mechanical Engineering (ICAME), S.V. National Institute of Technology, Surat, vol. 5, pp. 520 - 525, Paper code PI-6, 6th - 8th June, 2011.

6. Kashfull Orra and Ashok K. Sahoo (2011) Experimental investigations on tool wear and surface finish in hard turning of AISI 4340 steel using wiper coated carbide and ceramic insert, Proceedings of National Conference on Industrial Engineering (NCIE), West Bengal University of Technology, Kolkata, vol. 1, Page 44, Paper code MMMT 6, 17th - 18th February, 2011.

1. To be updated...